Kaiping faucet manufacturer: methods for handling faucet dripping
One thing you have to do is turn off the water supply. You should just turn off the water supply by turning off a water supply valve near the faucet, but if not every faucet in your house has a water supply valve, you have to turn off the main water supply valve to turn off the water supply in your house. Here are aidem Edmund's ways to deal with the dripping faucet caused by many reasons for your network. It is expected to bring sponsorship to colleagues in need!
1、 Press Faucet: no matter what surface the press faucet has, whether it has two handles for cold and hot water or only one handle to master cold and hot water together, it follows some basic principles. Here's how to disassemble a press faucet and fix the dripping problem: what you need: use these things to parry the press faucet - screwdriver, penetrating oil, carp pliers or behavior wrench and the pad they want to replace.
Process 1: turn off the water supply and remove the small screw on or behind the faucet handle to remove the handle fixed on the faucet body. A few screws are hidden under metal buttons, plastic buttons or plastic sheets, which are clamped or screwed into the handle. Just open the button and you will see the handle screw installed on the top. If required, loosen the screws with a little penetrating smooth oil like WD-40 specification.
Process 2: remove the handle and check the parts of the faucet. Remove the packing nut with carp pliers or adjustable wrench, and keep it steady without leaving scratches on the metal. Twist the spool or shaft in the same direction as when you turn on the faucet to screw them off.
Process 3: remove the screws fixing the washer. If required, the screws shall be loosened by penetrating smooth oil. Search and check the screw and valve core. If it is damaged, replace it with a new one.
Process 4: replace the old gasket with a similar new gasket. The new gasket almost matched with the old gasket can make the faucet no longer drip. You should also notice whether the old washer has an inclined or flat, and replace it with a similar new washer. The gasket only for cold water plan will swell violently when there is hot water flowing, and then block the outlet, making the flow of hot water slow. Some gaskets can work in hot and cold water, but you have to confess that the gaskets you bought for replacement are the same as the original ones.
Process 5: fix the new gasket on the valve core, and then reinstall the components in the faucet. Twist the stainless steel spool clockwise. After the valve core is in place, reinstall the packing nut. Hold tight and don't let the wrench scratch the metal.
Process 6: refit the handle and put the button or disc back. Open the water supply again and check whether there is any other leakage.
Article from: Kaiping faucet manufacturer http://www.caizhes.cn/
-
01-07
Kaiping faucet manufacturer: methods for handling faucet dripping
One thing you have to do is turn off the water supply. You should just turn off the water supply by turning off a water supply valve near the faucet, but if not every faucet in your house has a water supply valve, you have to turn off the main water supply valve to turn off the water supply in y
-
01-07
Kaiping stainless steel shower: how to buy shower hose
When we want to take a shower and find that the shower hose is damaged, resulting in water leakage and even can not be used, we need to replace the shower hose in time. But facing the colorful products in the supermarket, we may not be able to do it. Today's Xiaobian will teach you how to bu
-
01-07
How to replace the valve core of Kaiping faucet
The application frequency of faucet is very high, no matter in family life or outdoors, it is indispensable. Due to the frequent application, the frequency of problems is also very high, just as we often encounter faucet leakage. At this time, we need to disassemble the faucet to see if there is